NS350
Operating Manual
21
Push the select key when ready. The
NS350
will enter the calibration along the
axis. After a few seconds, 3 beeps will be emitted to notify the end of step 6.
•
Step 7 : ’7’ is now displayed on the lower screen. The
NS350
must be
oriented as follows :
Push the select key when ready. The
NS350
will enter the calibration along the
axis. After a few seconds, 3 beeps will be emitted to notify the end of step 7.
•
Step 8 : ’8’ is now displayed on the lower screen. The
NS350
must be
oriented as follows :
Advanced Operations
