NS350
Operating Manual
19
Push the select key when ready. The
NS350
will enter the calibration along the
axis. After a few seconds, 3 beeps will be emitted to notify the end of step 2.
•
Step 3 : ’3’ is now displayed on the lower screen. The
NS350
must be
oriented as follows :
Push the select key when ready. The
NS350
will enter the calibration along the
axis. After a few seconds, 3 beeps will be emitted to notify the end of step 3.
•
Step 4 : ’4’ is now displayed on the lower screen. The
NS350
must be
oriented as follows :
Advanced Operations
