NS350
Operating Manual
22
Push the select key when ready. The
NS350
will enter the calibration along the
axis. After a few seconds, 3 beeps will be emitted to notify the end of step 8.
•
Step 9 : ’9’ is now displayed on the lower screen. The
NS350
must be
oriented as follows :
Push the select key when ready. The
NS350
will enter the calibration along the
axis. After a few seconds, 3 beeps will be emitted to notify the end of step 9.
•
Step 10 : ’10’ is displayed on the lower screen. The
NS350
must be
oriented as follows :
Advanced Operations
