NS350
Operating Manual
15
The
NS350
will automatically exit the SET mode upon completion of all
parameters.
Note :
You can also exit the
SET
mode anytime by switching OFF and ON.
Exit Timer mode : ETI
After the start, the Timer mode is not needed anymore, for this reason the
NS350
will switch automatically to the desired exit mode by simply setting the
parameter ETI (Exit Timer mode) as follows :
•
Switch off your
NS350
•
Press
and the upper screen
simultaneously. ’SET’ is displayed
on the data line of the upper screen.
•
Press
until ETI (Exit Timer mode) is displayed on the data line of the
lower screen.
•
Use the arrows
to select the desired exit mode for your
NS350
.
•
Press
to store the value, TAK is now displayed.
•
Go through all the parameters to exit the SET mode or press and hold
for more than 4 seconds until the device turns off.
Tack mode Timer
threshold
TAK
- Default value is 10 seconds
- Adjustable from 1 to 90 seconds
RACe functions
activation
RAC
- ON
- OFF (if your sailing class does not
allow it during races)
RESet to factory
default values
RES
- ON to retrieve factory values
- OFF by default
Compass
Calibration
CAL
- ON to start
- OFF by default
Advanced Operations
