NS350
Operating Manual
18
NS350
. Upon completion of the sequence, the
NS350
will memorize the new
values and shut down automatically. If the
NS350
is shut down during the
calibration, nothing will be memorized.
Note :
Whenever necessary, the factory calibration values can be restored at
any time by setting the RES menu to ON in the SET mode.
•
Step 1 : ’1’ is displayed on the lower screen. The
NS350
must be oriented
as follows :
Push the select key when ready. The
NS350
will enter the calibration along the
axis. After a few seconds, 3 beeps will be emitted to notify the end of step 1.
•
Step 2 : ’2’ is now displayed on the lower screen. The
NS350
must be
oriented as follows :
Advanced Operations
