NS350
Operating Manual
16
Note
:
Only the MH mode and not its sub-mode (MHL, MHM, MHH) can be
memorized in the ETI parameter. However, the timer will switch automatically to
the memorized mode and the sub-mode that you are currently using.
Note
:
The mode by default is MH (magnetic compass mode).
Tack mode timer threshold : TAK
When the boat is in a heading wind, the time spent in seconds is displayed. If the
value is greater than the threshold value set, the timer value and ’TAK’ are
displayed alternatively. The value of the timer can be set from 1 to 90 seconds.
•
Switch off your
NS350
•
Press
and the upper screen
simultaneously. ’SET’ is displayed
on the data line of the upper screen.
•
Press
until TAK is displayed on the mode line of the lower screen.
•
Use the arrows
to select the desired threshold value (in seconds).
•
Press
to store the value, RAC is now displayed.
•
Go through all the parameters to exit the SET mode or press and hold
for more than 4 seconds until the device turns off.
Enable or disable the race functions : RAC
If your boat class does not allow on board electronic navigation aids, you may be
required to switch off the race functions. For more details about the modes
affected when switching off the race functions, please refer to the following table.
Advanced Operations
