9
Device Setup
|
Novak Electronics, Inc.
www.teamnovak.com
BATTERY VOLTAGE SENSOR
Sensor Description:
The Battery Voltage Sensor is used to monitor the voltage of the main battery pack in an
electric vehicle.
Measurement Range:
0-20 volts
Resolution:
0.100 mV
Plugs Into:
The 2-pin connector plugs into the Voltage Slot (
VOLT
) in
the Novak Sentry Data Logger unit with the black wire toward the
outside/left edge of the case.
Default Settings
(
configurable setting
):
Graph Color
:
Max Value
(Gauge Display Only)
:
20 volts
Name String:
Battery Voltage
Installation Instructions
(refer to images shown right)
:
The RED wire should be soldered or connected to the positive
(+) terminal of the battery pack or speed control.
The BLACK wire should be soldered or connected to the
negative (-) terminal of the battery or speed control
.
Connect to Battery Terminal
Connect to Speed Control Terminal
Replacement Part Number:
Novak Kit #
5362
WARNING!
Do not plug in this sensor backwards! Plugging in the voltage sensor backwards will cause
damage to your Novak Sentry Data Logger and void the
product warranty
.
Содержание DATA LOGGER
Страница 1: ...Instruction Manual...