background image

5

rate for which it was designed. 
b) Do not use the power tool if 
the switch does not turn it on 
and off. 

Any power tool that cannot 

be controlled with the switch is 
dangerous and must be repaired.
c) Disconnect the plug from the 
power source and/or the battery 
pack from the power tool before 
making any adjustments, changing 
accessories, or storing power tools

Such preventive safety measures 
reduce the risk of starting the power 
tool accidentally.
d) Store idle power tools out of the 
reach of children and do not allow 
persons unfamiliar with the power 
tool or these instructions to operate 
the power tool. 

Power tools are 

dangerous in the hands of untrained 
users.
e) Maintain power tools. Check for 
misalignment or binding of moving 
parts, breakage of parts and any 
other condition that may affect the 
power tool’s operation. If damaged, 
have the power tool repaired before 
use. 

Many accidents are caused by 

poorly maintained power tools.
f) Keep cutting tools sharp and 
clean.

 Properly maintained cutting 

tools with sharp cutting edges are 
less likely to bind and are easier to 
control.
g) Use the power tool, accessories 
and tool bits etc. in accordance with 
these instructions, taking into 

account the working conditions and 
the work to be performed.

 Use of the 

power tool for operations different 
from those intended could result in a 
hazardous situation.

5) BATTERY TOOL USE AND CARE

a) Recharge only with the charger 
specified by the manufacturer.

 A 

charger that is suitable for one type of 
battery pack may create a risk of fire 
when used with another battery pack.
b) Use power tools only with 
specifically designated battery. 

Use 

of any other battery packs may create 
a risk of injury and fire. 
c) When the battery is not in use, 
keep it away from other metal 
objects, like paper clips, coins, keys, 
nails, screws or other small metal 
objects, that can make a connection 
from one terminal to another. 
Shorting the battery terminals
together may cause burns or a fire.
d) Under abusive conditions, 
liquid may be ejected from the 
battery; avoid contact. If contact 
accidentally occurs, flush with 
water. If liquid contacts eyes, 
additionally seek medical help.

 

Liquid ejected from the battery may 
cause irritation or burns.

6) SERVICE

a) Have your power tool serviced by

Содержание NG-51





















Отзывы: