Nova gear NG-51, Инструкция по эксплуатации

Страница: 14 / 20

14
Fig.7
Torque alignment
arrow
TORQUE SETTINGS (TIGHTENING
POWER OF YOUR DRILL)
When using your drill for various
driving applications, it becomes
necessary to increase and decrease
the power and torque in order to
prevent the possibility of damaging
screw heads, threads, work pieces, etc.
In general, power and torque should
correspond to the difficulty of the
screw to be driven. If torque is too high,
the screws can be damaged or broken.
TORQUE ADJUSTMENT PROCEDURE
1. Locate the arrow on the front of the
drill housing.
2. Identify the torque settings and 1
drill setting on the torque adjustment
collar.
3. Rotate the torque adjustment
collar to the desired setting, aligning
the required number on the torque
adjustment collar with the arrow on the
drill housing (Fig. 7).
4. To increase or decrease torque,
rotate the torque adjustment collar. The
lower the number, the lower the torque
setting. The higher the number, the
higher the torque setting.
Always check that the correct torque
is selected by practising on scrap
material prior to carrying out a job.