background image

7

LITHIUM-ION BATTERY & 
CHARGER SAFETY

OVER CHARGING PROTECTION
This feature ensures that the battery is 
never overcharged. When the battery 
has reached its full charge capacity 
the charger will shut off protecting the 
internal components of the battery 
from being damaged.

OVER DISCHARGE PROTECTION
An internal component of the 
battery pack is an over discharge 
protector. This feature will stop the 
battery from discharging beyond the 
recommended lowest safety voltage.

OVER HEAT PROTECTION
The battery has an internal Thermister 
cut off sensor which will cease the 
charging cycle if the battery becomes 
hot during the charging process. This 
Thermister sensor will also stop the 
battery from operating should the 
battery become too hot during the 
operation of the tool. This can happen 
when the tool is overloaded or being 
used for extended periods of time.
Up to 30min in cooling time may 
be required depending on ambient 
temperature and operation being 
performed.

OVER CURRENT PROTECTION
Should the battery be overloaded 
and the maximum current draw be 
exceeded the battery will temporarily 
stop working to protect the internal 
components. The battery will resume 
to normal operation once the 
excessive current draw has returned 
to normal safe level. This may take a 
few seconds.

› If the ring securing the bit is 
damaged, the bit may come off during 
use causing personal injury.
› The torque delivered by the drill 
driver depends on how long it is
applied, the size of bit and other 
factors such as the state of the battery 
charge.
› Stop the drill driver before changing 
the direction of rotation. Always 
release the trigger switch and wait for 
the drill driver to stop before switching 
the direction of rotation.
› Never touch the bit whilst it is 
turning. Do not let the turning bit get 
near your hands or any other part of 
your body. You could be cut or caught 
up in the bit.
› Do not touch the bit after it has been 
in use for an extended period. It could 
be hot and burn you.

Содержание NG-51





















Отзывы: