6
their safety.
Children should be supervised
to
ensure that they don’t play with the
appliance.
Recommendations for the use of a
residual current device
with a rated
residual current of 30mA or less:
› Wear a hard hat (safety helmet),
safety glasses and/or face shield. It
is also highly recommended that you
wear a dust mask, ear protection and
padded gloves.
› Hold the power tool with a firm grip.
High reaction torque can briefly occur
while driving and loosening screws.
› Secure the work piece. A work piece
clamped with clamping devices or
in a vice, is held more secure than
by hand.
› One-handed operation can be
hazardous. It is recommended you
hold the unit firmly with both hands
when operating the tool.
› After installing the driver bit, pull
lightly on the bit to make sure that it
does not come loose. If the bit is not
installed properly, it can come loose
during use, which can be dangerous.
› Use a bit that matches the screw.
› Tighten the screw with the drill
driver lined straight with the screw to
prevent the screw head from being
damaged and to ensure the proper
force is delivered.
› Check that any bit to be used is not
cracked or broken. Broken or cracked
bits are dangerous.
a qualified repair person using only
identical replacement parts.
This will
ensure that the safety of the power
tool is maintained.
b) If the supply cord is damaged,
it must be replaced by the
manufacturer,
its service agent or
similarly qualified persons in order to
avoid a hazard.
ADDITIONAL SAFETY RULES
FOR DRILL DRIVERS
a) Hold power tool by insulated
gripping surfaces, when performing
an operation where the fastening
may contact hidden wiring or its
own cord.
Fasteners contacting a
“live” wire may make exposed metal
parts of the power tool “live” and
could give the operator an electric
shock.
b) Do not use the tool in wet or damp
conditions.
c) Wear ear protectors when drilling
Exposure to noise can cause
hearing loss.
This appliance is not intended for
use by persons (including children)
with reduced physical, sensory
or mental capabilities, or lack of
experience and knowledge,
unless
they have been given supervision or
instruction concerning use of the
appliance by a person responsible for
Содержание NG-51
Страница 18: ...18 NOTES...
Страница 19: ...19...
Страница 20: ...Spot on Laser and Tool Company 1300 658 338 www spoton com au...