background image

3

GENERAL SAFETY  

› DO NOT store or use the tool and 
battery pack in locations where the 
temperature may reach or exceed 
40ºC (such as outside sheds or metal 
buildings in summer).
› The charger is designed to operate 
on standard household electrical 
power (240 volts). Do not attempt 
to use it on any other voltage! The 
battery pack is not fully charged out 
of the carton. First read the safety 
instructions and then follow the 
charging notes and procedures.
› The longest life and best 
performance can be obtained if the 
battery pack is charged when the air 
temperature is between 18 - 24ºC. 
Do not charge the battery pack in 
an air temperature below 10ºC or 
above 40ºC. This is important and will 
prevent damage to the battery pack.
› Do not incinerate the battery pack 
even if it is seriously damaged or is 
completely worn out. The battery can 
explode in a fire.
› Never attempt to open the battery 
pack for any reason. If the plastic 
housing of the battery pack breaks or 
cracks, immediately discontinue use 
and do not recharge.

Save these instructions and other 
documents supplied with this tool for 
future reference.

1) WORK AREA SAFETY

a) Keep work area clean and well 
lit

. Cluttered or dark areas invite 

accidents.
b) Do not operate power tools in 
explosive atmospheres, such as in 
the presence of flammable liquids, 
gases or dust. 

Power tools create 

sparks which may ignite the dust or 
fumes.
c) Keep children and bystanders 
away while operating a power tool. 
Distractions can cause you to lose 
control.

2) ELECTRICAL SAFETY

a) Power tool plugs must match 
the outlet. Never modify the plug 
in any way. Do not use any adapter 
plugs with earthed (grounded) 
power tools. 

Unmodified plugs and 

matching outlets will reduce risk of 
electric shock.
b) Avoid body contact with earthed 
or grounded surfaces, such as 
pipes, radiators ,ranges and 
refrigerators. 

There is an increased 

risk of electric shock if your body is 
earthed or grounded.
c) Do not expose power tools to rain 
or wet conditions.

 Water entering a

Warning: Read all safety warnings 
and all instructions.

 Failure to

follow the warnings and 
instructions may result in electric 
shock, fire and/or serious injury.

!

Содержание NG-51





















Отзывы: