Norton Clipper CB 511, Руководство по эксплуатации

Страница: 10 / 36

VERS.2017.11.21 CB511_CB 651_MAN_EN
10

The machine should only be used by adult and competent persons (a training course is
recommended for those who have never used the machine).

Work procedures are safe when the following instructions are complied with.

This booklet must be delivered to the operator and properly preserved.

Responsibility lies with the owner of the machine. The machine operator is also responsible.

Maintenance must be done with the power off and be performed by qualified personnel.

It is prohibited to remove or tamper with guards!

Always use: protective helmet, earmuffs, goggles or protective visor, heavy duty or safety shoes
and work gloves. Do not work with loose garments.
2
MACHINE DESCRIPTION
Any modification, which could lead to a change in the original characteristics of the machine, may
be done only by Saint-Gobain Abrasives who shall confirm that the machine is still in conformity with
the safety regulations.
2.1 Short description
The band saw is a robust and powerful machine allowing precise cuts in a large variety of light
materials of construction. It can be used on building site but also in industrial environment.
2.2 Purpose of use
The machine is designed for the light concrete cut poroton, gasbeton. It is designed for no
other use.
2.3 Layout
Table of slip (1)
Allows (within the dimensional limits) to place in a stable way material to be crossed. It is put in
contact with the blade by manual push of the table at the time of the cut.
Consequently the machine can be used only
by one person who places himself on the controls side in order to control machine
start-up and stoppage.
Blade (2)
CB511 : It is a blade of dimensions 27x3850mm allowing the cut of concrete blocks cellular and
comparable
CB651 :It is a blade of dimensions 34*4120mm allowing the cut of concrete blocks cellular and
comparable.