Norton Clipper CB 511, Руководство по эксплуатации

Страница: 21 / 36

VERS.2017.11.21 CB511_CB 651_MAN_EN
21
5.3 Start-up and stoppage
5.3.1 Preliminary checks
It is prohibited to use the machine if any guards or safety devices are missing or inactive
CAUTION:
Before starting the blade make sure that no other operators or various objects are in the
vicinity of the machine.
Whenever you move, repair, maintain or check the machine make sure that it is cut off from the
power outlet. Before plugging the machine in you must:

Put the machine on a stable and level surface to ensure optimum support.

Check that the blade is sharp and in good condition. The blade must not have any cracks or
fissures. All teeth must be the same length and be perfectly sharpened.

Check that the blade is properly taut before starting up the machine (Pic.5)

Make sure the power outlet has the same phase characteristics as the electric motor and that
the power line is equipped with an earth leakage switch and a thermal-magnetic circuit breaker
or a short circuit fuse (max 15 Amp). Connect up the supplementary ground when present.

Electrical connection can be done after these preliminary operations are terminated.
IMPORTANT FOR THE PROPER FUNCTIONING!
Use an electric cable with section 3 x 2.5 mm2