Norton Clipper CB 511, Руководство по эксплуатации

Страница: 8 / 36

VERS.2017.11.21 CB511_CB 651_MAN_EN
8
1.2 Machine plate
Important data can be found on the following plate located on the machine:
1.3 Safety instructions for particular operating phases
The machine has residual risks that cannot realistically be eliminated by the manufacturer. Guards
cannot prevent access to the blade when cutting, not even if pushers or other safety tools are used.
Machine users must consequently keep in mind that sawing machines are among the most
dangerous of machines.
The machine must always be used with intelligence and good sense, adopting all the precautions
contained in this booklet.
CAUTION !!! RESIDUAL RISKS
In band saws access to the blade is always possible, even if the vertical blade
guard is properly adjusted and clamped in place 5mm above the piece to be cut.
The band blade is protected against accidental contacts during its entire length
except for the section that is strictly necessary to make the cut.
Therefore it is absolutely necessary:

When making cuts keep your hands away from the blade.

Always use a pusher to finish the cut.

Use special tools when pieces to be cut have uneven shapes:
(For example: for pieces which do not have a good support surface create
supports that house the piece to be cut).

Totally lower the blade guard at the end of work.
Machine Model
Weight
Year of production
Frequency
Safety
standard
Type Machine
Serial number
Power
Voltage
Intensity
Symbols