NorthStar 958, Руководство оператора

Страница: 113 / 232

Chapter 7 - Understanding the Routes Function
958 Operator’s Manual, Rev. A Page 105
route and the four-digit number uniquely identifying
each waypoint).
4. Repeat these steps for each new waypoint or cursor loca-
tion you want to add to the end of the route.
5. When done, to add waypoints to the beginning or middle
of a route, press the
CANCEL ADD
menu key. To go to
list-based editing, press the
RETURN
menu key. To go
back to the
CHART
screen, press the
CHART
key.
Removing waypoints from a route
To remove waypoints from the route (the waypoint is not
removed from the 958):
1. Move the cursor to the waypoint you want to remove,
then press the
REMOVE WAYPT
menu key.
2. You can remove more waypoints by selecting them with
the cursor and pressing the
REMOVE WAYPT
menu key.
Even if you remove all the waypoints from a route, the
958 still stores the empty route. To remove the route
entirely, see ”Erasing an entire route” starting on page
108.
3. When done, to go to list-based editing, press the
RETURN
menu key. To go to the
CHART
screen, press the
CHART
key.