Setting System Configuration Data
Installation
7-20
Centillion 1200N ATM Switch User Manual
NTP 297-8103-903
Follow the instructions below when using the equipment in a country or region
where it must conform to EMI EN55022 Class B.
■
Coaxial cable
Install near the connector a ferrite core so the cable makes a loop. (See Figure
number 7-14.)
■
UTP cable
Install near the connector a ferrite core so the cable makes a loop. (See Figure
number 7-14.)
■
AC power cable
Install near the connector a ferrite core so the cable makes a loop. (See Figure
number 7-14.).
■
RS-232C cable
❑
Use a metal connector.
❑
Use a shielded cable.
❑
Securely fasten the metal connector to the main unit.
■
Do not use DS3, 6.3M interface cards.
NOTE