MM371W / MM372W Installation Instructions
13
●
Remove the operator from the gate post
and gate brackets.
●
Swing the gate to the open position.
●
With the gate fully open, install the
closed position stop plate on the gate
opposite the operator (hardware not
included).
●
Do not fully tighten hardware until after
the next step.
INSTALLING THE CLOSED POSITION STOP PLATE / PUSH-TO-OPEN
H
1
1
2
Step 1
Step 2
●
Swing the gate to the closed position,
and adjust the closed position stop plate
against the fence post.
●
Tighten the mounting hardware.
●
With the gate in the closed position,
reinstall the operator arm.
Your Property
Note:
For MM372W installations, the closed position stop plate should be installed on the leading edge of the PRIMARY gate leaf,
and adjusted to close against the leading edge of the SECONDARY gate leaf.
