4
MM371W / MM372W Installation Instructions
M
L
T
V
Q
K
U
●
Using a permanent marker, mark the center of
the mounting locations for the gate post bracket
subassembly.
●
Remove the operator arm from the gate post and
gate brackets.
●
Mark the center of the mounting locations for the
gate bracket.
●
Open the gate and reattach the operator to the gate
bracket.
●
Ensure that the operator arm is level and the
brackets are securely clamped.
●
Secure the post pivot bracket in place by installing
the hardware shown. Tighten both bolts (O and Q).
●
Remove the gate post and gate brackets.
●
Use a hammer and center punch to mark the center of
the mounting locations.
Step 6
Step 5
Step 7
PULL-TO-OPEN OPERATOR MOUNTING
Your Property
