27
MM272 Installation Instructions
If you have a question about any special order item, call 1-800-543-4283
Accessories are Available From Your Retail Store (con't)
The contents of all material available on this installation manual are copyrighted by Nortek Security & Control, LLC (“NSC”), unless otherwise indicated. All rights are reserved by NSC, and content may not be reproduced, downloaded,
disseminated, published, or transferred in any form or by any means, except with the prior, written permission of NSC. Any reprinting of NSC publications is by permission only. Copyright infringement is a violation of federal law.
Mighty Mule¨, E-Z Gate¨, NSC¨, “Dual Sense Technology” are registered trademarks of Nortek Security & Control, LLC, America’s DIY Automatic Gate Openers is a trademark of Nortek Security & Control, LLC and are the exclusive property of
Nortek Security & Control, LLC (“NSC”).
All rights are reserved by NSC, and these marks may not be used, in any for without the prior, written permission of NSC.
Low Voltage Wire (RB509)
The 16 gauge, multi-stranded, dual conductor Low Voltage Wire is for connecting the AC powered
transformer, or the Solar Panel to the control board. Also used for the connection of accessories, such as
locks, keypads, push buttons and other wired control devices. This specially designed wire is UV treated,
PVC coated and ready for direct burial
Push to Open Bracket (FM148)
Required when Mighty Mule gate opener must push the gate open, such as on a sloping driveway or
where space prevents gate(s) from opening inward (pulled open). Order two brackets for conversion of a
dual swing gate installation.
Wireless Entry Intercom / Keypad (MM136)
Allows owner to screen guest at the gate before allowing access to the property. Keypad also allows
owner to give up to 25 programmable entry codes to family, friends or approved delivery personnel.
Codes can be permanent or temporary. Up to 500 feet reception.
Additional base stations available (MM136B).
Replacement Transformer (RB503)
16VDC power supply for maintaining the battery with the Mighty Mule gate operator.
Garage Door Receiver (RB709U-NB)
The Garage Door Receiver allows you to use the same 2 button Mighty Mule entry transmitter to operate
your gate operator and your garage door operator. Compatible with most garage door operators.
Wireless Driveway Alarm (FM231)
This device alerts you of vehicles entering and exiting your property. When a vehicle passes the sensor,
the receiver emits an audible tone and lets you know someone’s there. Functional range of up to 400 ft.
Easy-to-install.
Wireless Driveway Vehicle Sensor (FM130)
Automatically activates gate operator “Hands-Free” when a vehicle exits the property. 100 ft. range
between transmitter and receiver. Easy installation.
