Nortek Security & Control MIGHTY MULE MM272 Скачать руководство пользователя

Страница: 37 / 40

MM272 Installation Instructions

Accessories

Please visit

www.mightymule.com

for photos and

detailed descriptions of Mighty Mule Accessories,
or call Mighty Mule sales 1-800-543-4283.

Solar Panel (FM123)

If your gate is more than 1000' from an AC power source, you can choose to maintain the battery charge with the

Solar Panel Charging Kit. Installation in some regions of the world will require multiple solar panels for adequate

charging power.

Pin Lock (FM133)

The Pin Lock substitutes for the clevis pin at the front end of the Mighty Mule gate openers. Helps prevent theft

of the opener from the gate.

MMT103

The MMT103 Code Safe digital transmitter is a wireless radio control designed for use with Mighty Mule garage

door openers and can also be programmed to your Mighty Mule gate openers. One remote for two or three

devices.

MMK200 Keypad

The Mighty Mule Wireless Keypad is designed to control access to all Mighty Mule Garage Door Openers. This

keypad features a LED back light that allows you to see numeric keys throughout dark or unfavorable weather

conditions.

Mounting Post (FM100) - In Ground

This black powder coated pedestal is designed to provide convenient access to your keypad, wireless intercom,

or other access control device from your vehicle. Surface Mount Flanges (F102) and Extensions (F103) for added

height are available.

Mighty Mule Vehicle Sensor (FM138)

The Sensor is an electromagnetic sensor, which offers "hands free" operation of the Mighty MuleGate Opener

with a 12 ft. radius of detection of vehicles in motion. A wireless version of the Gate Opening Sensor is available.

(FM130)

Automatic Gate Lock Pull-to-Open (FM143)

A MUST for added security. Solenoid driven, with a steel housing. Unlocks and locks automatically as gates open

and close. Comes with a keyed manual release. Recommended for gates over 8 ft. long.

AUTO

MATIC

GATE

LOCK

ELECTRONIC SECURITY LOCK

Содержание MIGHTY MULE MM272









































Результаты поиска

Содержание MIGHTY MULE MM272

Отзывы:

Похожие инструкции для MIGHTY MULE MM272

Бренды по названию

Популярные бренды

Nortek Security & Control MIGHTY MULE MM272, Руководство по установке

Результаты поиска

Содержание MIGHTY MULE MM272

Отзывы:

Похожие инструкции для MIGHTY MULE MM272

Бренды по названию

Популярные бренды