MM272 Installation Instructions
18
MMT103 Transmitter
Learning the MM103
With system off, press and hold the transmitter button you want to use, then
turn on the system and keep holding the button until the system "beeps" once.
ON/OFF
Switch
ON/OFF
WARNING
: Changes, modifications or adjustments not expressly approved by
Nortek Security & Control, LLC could void the user’s authority to operate this
equipment. There Are No User Serviceable Parts.
NOTE
: For instructions on using the FM134/135 transmitter with this product,
refer to
NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 the FCC. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
