Nortec NHRS 010-090 Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 70

background image

Installation | 32

Keep Warm (Outdoor Standard)

Menu configuration setup can be done at factory, which allows the water temperature in the
tank to be maintained at 160ºF (70ºC) for quick response of the unit to a call for humidity. This
aids in minimizing health concerns associated with standing water.
Part number 1504561.

Nortec Online/LINKS2

Nortec OnLine enables a humidifier to communicate and be monitored through the Internet.
Several configurations are available: Dynamic Host Configuration Protocol (DHCP), Dial-up,
General Packet Radio Service (GPRS), Slave, and Static IP. Consult factory for details.

Nortec LINKS provides monitoring and control allowing humidifier(s) to communicate to a
Building Management System (BMS). The controller is factory installed and is located internally
to the humidifier. Several communication protocols are available: BACnet MSTP, BACnet IP,
Johnson N2, and LonWorks. Consult factory for details.

Nortec LINKS2 is a package that includes both items above: a particular communication
protocol as well as Nortec OnLine.

Remote Relay Board

An optional remote fault kit is available that can provide remote indication of humidifier status.
The relays will activate upon the following humidifier conditions: steam production, unit fault,
maintenance/service, and unit power. The kit can be factory or field installed and can interface
with a BMS. See Page 30 for wiring and installation.
Part number 1508069.

Scale Management System

The Scale Management System provides a separate reservoir underneath the steam tank for
scale collection. The addition of this option reduces maintenance time significantly. Minerals
removed from the water during steam production will collect in the scale reservoir rather than in
the tank. When minor maintenance is needed, the scale reservoir is easily removed and
emptied. Without this option, the NHRS requires more effort during minor maintenance:
cleaning of the steam tank and heating elements. More humidifier downtime is required for this
maintenance. With the Scale Management System, minor maintenance simply requires the
scale reservoir to be emptied, which can be done in a matter of minutes.
Part number 2533179 (two must be ordered for units with two tanks, NHRS 135 & NHRS 180).

Solid State Relays

Solid State Relay Control (SSR Control) allow for rapid response upon a call for humidity by
replacing the standard contactors with a higher-performing component. The operating window
for the standard contactor is 2 minutes, but the SSRs will cycles in approximately 2 seconds.
This allow for quick response and tight control of the humidity. This option is essential where a
tight humidity tolerance is required.
Part number will vary according to the capacity and voltage of the unit.

«
...
33
34
35
36
37
...
»

Содержание NHRS 010-090







































































Отзывы:

Нет отзывов

Похожие инструкции для NHRS 010-090

Бренд: Condair Страницы: 72

Бренд: Paris Rhone Страницы: 11

Бренд: Air innovations Страницы: 12

Бренд: Livart Страницы: 6

CDAS HL 050 Series

Бренд: Parker Страницы: 398

Бренд: Nordic Home Culture Страницы: 32

Бренд: cecotec Страницы: 24

Бренд: Timberk Страницы: 24

Бренд: Campomatic Страницы: 6

Бренд: Sullair Страницы: 84

Бренд: Stadler Form Страницы: 60

Бренд: Romus Страницы: 44

Бренд: Nortec Страницы: 100

Бренд: SPT Страницы: 4

Бренд: Dantherm Страницы: 21

Бренд: DanVex Страницы: 39

Бренд: Lanaform Страницы: 56

Бренд: Ultrasonic Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды