Nordson PowderPilot HD, Руководство пользователя

Страница: 26 / 52

Powder Pilot ™HD
P/No.7192721_02
Page | 26
Group set point adjust
P ressing the button “ C ” on the gun spray control screen will show up the screen below:
Exit screen
1 2 3
Through this screen the operator can define set points to be adjusted by using the following symbols:
1 – set point values – this fields are used to enter the value of a specific set point
2 – first gun – the number of the 1 st gun in a series of guns to be selected
3 – last gun – the number of the last gun in a series of guns to be selected
A – all set points – touching this symbol will download all set points to the selected guns
B – KV set point – touching here will download KV set points to the selected guns
C – µA set point – touching here will download µA set points to the selected guns
D – Powder output – touching here will download Powder output set points to the selected guns
E – Pattern Air – touching here will download Pattern Air set points to the selected guns
F – Trigger enable – touching here will enable the selected guns to trigger
A
B
C
D
E
F