Nordson PowderPilot HD, Руководство пользователя

Страница: 43 / 52

Powder Pilot ™ HD
P/No.7192721_02
Page | 43
Step 4 – hopper purge:
During this step the hopper is cleaned from inside using the pumps and according to timings set up during
configuration.
While cleaning the inside of the hopper, it should be avoided to open the cyclone hopper or anything else
effecting the extraction. Otherwise the cleaning result will be compromised
The operator needs to start the cleaning of the HDLV transfer pumps by touching the pump symbols on
the right. Active pump cleaning is visualized by the blue arrows above the pump symbols
After the configured amount of pulses through the hopper the - button appears again to carry the
user to the next screen.