Nordco Trailblazer BC60, Руководство по эксплуатации и обслуживанию

Страница: 61 / 72

MAINTENANCE
BC 60 "Trailblazer" Brushcutter
Section 3-16
AUGUST/2012 (49458202/8203)
T19. Test Hydraulic Oil Cleanliness
Proper fluid condition is essential for
long and productive life of hydraulic
components and systems. Thorough
precautions should always be observed
to insure the hydraulic system is clean:
1. Filter each change of oil to prevent
introduction of contaminants into the
system.
2. Maintain the proper oil level and
regularly service filters, breathers, and
reservoirs.
3. Take precautions to prevent moisture
contamination.
Change fluid whenever contamination
occurs because even small amounts of
water can affect system performance as
well as induce corrosion and oil
breakdown.
T20. Check Air Cleaner Indicators (Engine and Cab)
Do not allow air inlet restriction to
exceed 20 inches of
water (5.0 kPa) under any operating
conditions. Inspect the
entire air system for leaks daily. Look for
torn air inlet piping
or boots and loose or damaged clamps.
Have worn or
damaged parts repaired or replaced, as
required.
Retighten any loose connections.
T21. Drain Water Separator/Fuel Water Trap on Engine (if equipped)
If the engine is equipped with a
fuel/water separator, drain off any water
that has accumulated. Water in fuel can
seriously affect engine performance and
may cause water
damage.
ENGINE
INDICATOR