Nordco Trailblazer BC60, Руководство по эксплуатации и обслуживанию

Страница: 10 / 72

SAFETY
BC 60 "Trailblazer" Brushcutter
Section 1-4
OCT/2012 (49458202)
You should always have at least
two people working together if the
engine must be run during service.
One person needs to remain in
the
command position (at the
controls), ready to stop the
machine and shut off engine if the
need arises.
5. Collect oils and fuels and dispose
of them properly. There is a
danger of scalding when working
with engine oils.
6. Use only Nordco supplied repair
parts for this machine. Use of
non-OEM designed parts could
comprise the integrity of this
machine.
7. There are welding cautions on this
machine. Pay attention to them
PRIOR to welding.
8. Kits supplied by Nordco have
welding instructions included.
Welding of any components NOT
of Nordco’s manufacture or failure
to follow these instructions may
affect the stability of this machine.
9. Always wear heavy work gloves
when performing maintenance on
the cutter heads. Teeth are razor
sharp, especially when new.