Nordco Trailblazer BC60, Руководство по эксплуатации и обслуживанию

Страница: 52 / 72

BC 60 "Trailblazer" Brushcutter
MAINTENANCE
AUGUST/2012 (49458202/8203)
Section 3-7
T4. Pump Drive
The type of service and the operating
conditions will determine the service
interval. However it is recommended that
the oil level be checked weekly, at the
same time checking for oil leaks.
Because the lubricant system is the
heart of the unit, it is especially important
that the oil be kept clean.
1. Stop engine before checking or adding
oil.
2. Clean around oil fill before checking or
adding oil.
3. It is recommended that lubricating oil be
changed after the first 500 hours of
service.
4. Thereafter, and under normal operating
conditions, it is recommended that the oil
be changed after every six months of
operation. The oil in the unit should be
changed whenever the oil level shows
discoloration or strong odor.
5. Drain oil while the unit is still warm,
examining for contamination or metal
particles. The magnetic drain plug is
located at the bottom tip of the pump drive.
6. Clean all magnetic drain plugs before
replacing.
7. Do not overfill. This will result in
overheating and possible malfunction of
the unit.