Nordco Trailblazer BC60, Руководство по эксплуатации и обслуживанию

Страница: 50 / 72

BC 60 "Trailblazer" Brushcutter
MAINTENANCE
AUGUST/2012 (49458202/8203)
Section 3-5
Detailed Daily Instructions
T1. Perform Check On Cutterhead – Saw-Blade Heads
1. Inspect disks for missing teeth
and/or damaged or chipped teeth.
2. Check that all hardware and tooth
securing devices are properly in
place.
3. Inspect disk/shaft connection: There
should be no play when hand force is
applied to the flywheel. Free play
indicates that the cutter shaft nut is
not properly torqued and/or the
cartridge bearings are worn.
4. Insure that cotter KEY in cutter shaft
is properly installed.
5. Grease cutterhead until grease can
be seen exiting between cutterhead
frame and flywheel.
For more detailed instructions on the
maintenance of the saw blade, refer
to the QUADCO Manual behind the
OTHER tab at the back of this
manual.
Make certain heavy duty gloves are
worn at all times when performing
maintenance near or on the saw-
blade heads!
T2. Brake Adjustments
The brake lever adjustment screw is
used to adjust the clearance between
the brake shoe and the wheel.
If the brake shoe is wearing unevenly,
use the brake pad adjustment screw.