Nordco Trailblazer BC60, Руководство по эксплуатации и обслуживанию

Страница: 53 / 72

MAINTENANCE
BC 60 "Trailblazer" Brushcutter
Section 3-8
AUGUST/2012 (49458202/8203)
T5. Wire Rope Inspection and Replacement
ROPE INSPECTION
Inspect rope daily.
Sections of rope which are repeatedly
placed under stress when the initial load
of each lift is applied such as those
sections in contact with the sheaves.
At each end of the rope, tow areas must
be inspected. The fitting that is attached
to the rope and the condition of the rope
where it enters the attachment
The general condition of the drum
should be inspected carefully. If there is
damage to the drum, there is damage to
the rope as well.
INSPECTION OF WIRE ROPE
Check for abrasion, fatigue, corrosion
and wear.
Corrosion usually occurs from the inside
out and therefore is the hardest of all to
find.
Wire rope that shows evidence of
birdcaging, kinking, fraying, and any
other damage MUST be removed from
service.