17 of 36
Palletizer for AUBO Robots - Installation Manual
–
Ver. 1.7
7.
If available, select the package in the list and click
“Update Software”.
8.
To update the
firmware
, go to the “Update Firmware” tab and repeat steps 5, 6 and 7.
6.
Installing Palletizing Software
The following section describes the installation process of the AUBO extension. The software is
located on the USB provided by Nordbo Robotics.
Note:
If you have received the files without a USB flash drive, you must first obtain a USB formatted
to FAT32 (the default format on most USB flash drives) or EXT4 and copy the files to the USB.
1.
Insert the USB flash drive into the robot controllers USB port marked in figure 13.
Figure 13: AUBO control box USB location
