Norcross ML100DR, Инструкция по эксплуатации

Страница: 7 / 21

Figure 17
Outboard Inboard/Outboard
Inboard
Sailboat
31
1. Upon applying power to the transmitter and receiver,
place the display over the transmitter. Refer to Figure
1 for proper alignment.
IMPOR TANT!!!!
Before Installing the ML100DR and ML100R, it will be
necessary to match the receiver to the transmitter.
This can be completed before installing the system
on the vessel by simply applying power to the trans -
mitter and receiver and following steps 1 thru 3. The
receiver retains this unique code in its memory, and
will only need to be relearned if the channel on the
transmitter is changed.
Transmitter
Transmitter
ML100DR
ML100R
6
Figure 1
Display
Display