Norcross ML100DR, Инструкция по эксплуатации

Страница: 6 / 21

Never use adhesive to fill
gaps between the trans-
ducer and the hull since
this will greatly reduce
performance (Figure 18).
Headroom
Choose a location with enough headroom inside the boat to
complete the installation.
Hull material
Since the hull absorbs acoustic energy, transmitting through
the hull reduces the transducers performance. Fiberglass
hulls are often reinforced in places for added strength. These
cored areas contain balsa wood or structural foam which are
poor sound conductors. To achieve optimal performance,
find a location where the hull laminate is solid (not cored).
Figure 18
NO
Do not use
RTV sealants
or adhesives
to fill gaps.
32
T
RANSDUCER
I
NSTALLATION
Transom Mount Transducer Installation
(P23 Tr a n s d u c e r )
• Please follow the supplementary instruction provided
in the transducer hardware package.
Thru-Hull Transducer Installation
(P6 Transducer)
• Please follow the supplementary instruction provided
in the transducer hardware package.
In-Hull Transducer Installation
(P23 or P6 Transducer)
• Please follow the supplementary instructions provided
in Appendix A of this manual.
5
S
ETTING
U
P THE
T
RANSMITTER AND
R
ECEIVER
The ML100DR and ML100R wireless displays utilize a
code learning function which allows the transmitter to
exchange its unique operating code with the receiver.
This code learning feature makes each wireless depth
sounder unique, therefore eliminating the chance of your
system interfering with a nearby vessels.