Norcross ML100DR, Инструкция по эксплуатации

Страница: 19 / 21

2. The "UP" key will increase the selected value. The
"DOWN" key will reduce the value. Pressing either key
will change the value in 1-foot increments. Holding
down the key will change the value in 9 foot increments
per second.
3. After your selection is made, the unit will return to
normal operation after 5 seconds.
4. The " "and "
▼
" icons will now be present.
When triggered, the alarm sounds an audible "buzzer" for
ten seconds while flashing the warning LED and the "
▼
"and " " icons on the display. After 5 seconds the audi-
ble alarm mutes and the warning LED and the " "and "
▼
"
icons continue to blink until the depth increases, or the
alarm is reset. To reset the alarm repeat step 1 thru 4. To
turn the alarm of set to “000”.
19
2. The "up" key will increase the selected value. The
"down" key will reduce the value. Pressing either key
will change the value in 1-foot increments. Holding
down the key will change the value in 9 foot incre-
ments per second.
3. After your selection is made, the display will return to
normal operation after 5 seconds.
4. The " "and "
▲
" icons will now be present.
When triggered, the alarm sounds an audible "buzzer" for
ten seconds while flashing the warning LED and the "
▲
"and " " icons on the display. After 5 seconds the audi-
ble alarm mutes and the warning LED and the “ "and "
▲
"
icons continue to blink until the depth increases, or the
alarm is reset. To reset the alarm repeat step 1 thru 4. To
turn the alarm off set to “000”.
18
Deep Alar m
The DEEP alarm function can be set for depths ranging
from 3 to 200 feet and triggers an alarm when the depth is
more than the setting.
To set the DEEP ALARM
(lower alarm):
1. Press and hold the
"DOWN" key for 2 seconds
(Figure 15). The current
alarm setting will be dis-
played on the display.
"000" is the default setting.
Figure 15