Norcross ML100DR, Инструкция по эксплуатации

Страница: 17 / 21

N
OR
C
ROSS
L
IMITED
W
ARRANTY
NorCross Marine Products, Inc. warrants, to
the original purchaser, this product to be free
from defects in materials and workmanship
for two years from the date of purchase. If the
unit fails to perform as described in the prod-
uct’s written specifications, due to a defect in
materials or workmanship, we will repair it
free of charge to the customer for parts or labor. The cus-
tomer, however, is responsible for any costs associated
with returning the unit to NorCross. This warranty is void
if damage or malfunction is due to abuse, misuse, acci-
dent, failure to reasonably maintain, improper installation
or use, or unauthorized alteration or repairs. Norcross
retains the exclusive right to repair or replace the unit at its
sole discretion, and holds this right as the exclusive rem-
edy available to the customer against NorCross for any
defect, malfunction, or non-conformity concerning the
product, or for any loss or damage resulting from any
other cause whatsoever. Norcross will respond to all war-
ranty claims within a reasonable time after receipt of the
unit from the original purchaser, with such response time
not to exceed thirty days without written notification of
delay to customer.
To obtain warranty service, securely pack the unit, and
mail prepaid via insured post to: NorCross Marine
Products, Inc., Warranty Department, 1629 Prime Court -
Suite 800,Orlando, FL 32809. A copy of the original sales
receipt is required as the proof of purchase for warranty
repairs. Please be sure to include your name, address,
email address, and a daytime phone number within the
package.
21
Turning the Displays On/Of f
ML100DR In-Dash Wireless Display
When installed to a switchable 12v power source the dis-
play will turn
ON/OFF with the power supply.
ML100R Portable Wireless Display
To turn the ML100R ON press and hold the “UP” and
“DOWN” keys at the same time for 5 seconds. When
the display turns on release the keys.
To turn the ML100R OFF press
and hold “UP” and “DOWN”
keys at the same time for 5 sec-
onds. When the display reads
“OFF” release the keys (Figure
12). The display will also turn
off automatically after 5 minutes
if no signal is received from the transmitter.
Setting the Units
The UNITS of measure for depth
readout and alarm functions can
be set in 4 easy steps. The two
settings available are Feet (FT)
and Meters (M). (Figure 13)
16
Figure 12
Figure 13