NorAM 65E Turbo Motor Grader, Руководство по обслуживанию

Страница: 436 / 830

65E Turbo Motor Grader
Service Manual
6 - 43 Service 2.00_2013.03
Section 6
Rear Axle and Tandem
Step 13: Record thickness of pinion head, "H".
Step 14: Fit under head bearing on pinion and measure
thickness, it can be reached measuring height from
pinion head face to outer edge of bearing less thickness
of pinion head (dimension "H"). Identify thickness of
bearing as "M".
Step 15: Compute adjustment shim thickness "S" for
proper axial position of bevel pinion: S = E - (F + M).
Reduce by 0.002 in. (0.05 mm) thickness computed, to
compensate lengthening of bearings after press fitting.
Position adjustment shim in relevant seat, then press fit
on pinion support outer races of under head and shank
bearings of bevel pinion.