-23-
START-S19
Operating guide
DESCRIPTION
VALORI ACCETTATI
DEFAULT
S 30
Charge standard settings 4
S 31
Charge standard settings 5
S 32
Activate the password to enter in the menu.
Inser the code and let the time goes
S 33
Deactivate the password to enter in the menu
S 34
Not used
S 35
Activate interlock function (with S04 in 1 activate the 2nd door after detec-
ting the passage
0 deactivate - 1 activate
0
S 36
Activate input SAFETY EDGEA1 when opening,too
0 deactivate - 1 activate
0
S 37
Activate and adjust the electric brake
0
S 38
Contact safety edge 2
0 contact N.C. - 1 8K2 contact
1
DESCRIPTION
R 01
Activate opening until release of P1 with acceleration
R 02
Activate closing until release of P1 with acceleration
R 03
Activate opening until release of P1 with slow down speed
R 04
Activate closing until release of P1 with slow down speed
R 05
Activate out SIGNAL LIGHT until release of P1
R 06
Activate output for TEST untile release of P1
R 07
Activate output LIGHT until release of P1
R 08
Activate outpu for interlock
R 09
Activate 230 Vac brake
R 10
Value of the input SAFETY EDGE 2
R 11
NUMBER of cycles
R 12
Activate the built-in electronic brake
Group “R”
Group “L”
DESCRIPTION
L 01
GRADUAL STARTING (SOFT-START) If 0 the function is not activated.
Form 1 to 10 increase the acceleration ramp of the gradual startnig
L 02
Not used
L 03
Level for the automatic stop for the motor absorption
L 04
Persistance time of the motor absorption .If you increase this value the intervention of the motor will be delayed
Group “C”
DESCRIPTION
C 01
Learning of the START command
C 02
Learning of the PARTIAL OPENING command
C 03
Cancellation of the memory CODE
C 04
Cancellation of a single CODE
