-16-
START-S19
Operating guide
4.3
Set up of SPEED and ACCELERATION
Setup
Description
L 01
Set up of the GRADUAL DEPART. Parameter at 0 the function is not activated
From 1 to 10 you increase the acceleration ramps of the gradual depart.
L 02
Increasing the value, the fore will be reduced after the slow down
L 03
Level for the automatic stop for the motor absorption.
L 04
Persistance time of the motor absorption.
If you increase this value the intervention of the motor will be delayed
Here are reported the parameters for SPEED, ACCELERATION and CONSUPTIONS:
If you adjust L01 from 1 to 10 (0 function not activated) is possible to let the motor opens with an acceleration ramp.
The more this value is higher, the more the acceleration ramp is longer.
L3 and L4 indicate the level of intervention for the power absorption of the motor and the delay of intervention. The
value of L03 can be tested using TEST from R01 and R02 where is displayed the istant motor absorption
