NKT Photonics Koheras ACOUSTIK Скачать руководство пользователя страница 52

Страница: 52 / 96

Enabling emission from an individual BASIK module

5 When the module is selected and the

Interlock

indicator is GREEN, click the

Emission

button once to enable emission.

The emission indicator (next to the

Emission

button) turns ON RED.

NOTE:

Only the selected module’s emission

status changes. For other modules in the
system, their emission status remains
unchanged.

If the Status indicator turns:

•

ON GREEN – the module is operating

normally.

•

Flashing GREEN – the module has not

stabilized.

•

RED – a system ERROR or interlock

opened with emission enabled. (Emission
will be disabled.)

6 Observe that the status panel shows the

indicators in the emission enabled state.

•

Interlock – ON GREEN

•

Status– ON GREEN

•

Emission – ON RED

Further, observe that in the

Module overview

panel, the

Status

and

Emission

column

indicators for the selected module are ON GREEN and RED respectively.

Action

Interlock

Indicator
GREEN

Click

Emission

(ON)

Status

indicator ON

GREEN and

Emission

button ON RED

Содержание Koheras ACOUSTIK

































































































Результаты поиска

Содержание Koheras ACOUSTIK

Отзывы:

Похожие инструкции для Koheras ACOUSTIK

Бренды по названию

Популярные бренды

NKT Photonics Koheras ACOUSTIK, Руководство по эксплуатации продукта

Результаты поиска

Содержание Koheras ACOUSTIK

Отзывы:

Похожие инструкции для Koheras ACOUSTIK

Бренды по названию

Популярные бренды