NKT Photonics Koheras ACOUSTIK, Руководство по эксплуатации продукта

Страница: 75 / 96

75
Control panel
Control panel
Wavelength offset
Use the slider or text input field to set a wavelength offset for all inserted BASIK
modules. The range shown is in picometers increments.
Power
Use the slider or text input field to set the power level of all inserted BASIK
modules. The scale of the slider can be selected to either dBm or mW units.
Note: The slider control and text input field are only active when at least one in-
serted BASIK module supports adjusting power.
Figure 41 Operating mode set to power
Module overview
When CONTROL connects to a Koheras ACOUSTIK system, a Module overview
panel is displayed beneath the Control and Status Panels. As shown in
Figure 42 ,
each row in the overview represents an inserted module and the column fields
display the module parameters and statuses. Clicking on a row, selects the actual
module and switches to the Control and Status panel views for the module.
Current Set
Point Slider
The wavelength
offset can be
manually entered
The output power
scale can be set to
either dBm or mW