Nivus NivuFlow 750, Инструкция по эксплуатации

Страница: 20 / 162

Instruction Manual
NivuFlow Mobile 750
page 20 NFM 750 - rev. 03 / 27.05.2020
Delivery, Storage and Transport
11 Delivery
The standard delivery of the NivuFlow Mobile 750 basically contains:
•
Transmitter type NivuFlow Mobile 750 (according to shipping documents)
•
Ring magnet (solenoid)
•
USB stick
•
Screw driver for hexagon socket screws
•
PU stickers (two pieces: 31x17x3.5 mm) to avoid vacuum in the enclosure in case of
being returned (via airfreight) to NIVUS (e.g. for maintenance)
•
T-shape antenna (only for versions with internal GPRS / UMTS / LTE modem)
•
Padlock (only for Ex versions)
•
Instruction manual (incl. certificate(s) of conformity) containing any relevant information
on how to operate the NivuFlow
Check extra accessories depending on your order and by using the delivery note.
12 Reception inspection
Check the packaging for visible damage immediately after receipt. Any possible damage in
transit shall be instantly reported to the carrier. Furthermore a written report shall be sent to
NIVUS GmbH in Eppingen.
Incomplete deliveries shall be reported in writing either to your local representative or directly
to the NIVUS head office in Eppingen within two weeks.
Important note
Mistakes cannot be rectified later!

Prior to the first use:
1. Open enclosure cover.
2. Remove both PU stickers (two pieces; 31x17x3.5 mm), if available, from the left
and right enclosure frame (Fig. 15-1 no. 1). The stickers have been attached
prior to shipping (via airfreight) to prevent the enclosure from getting closed and
to avoid vacuum formation due to extreme temperature changes during ship-
ping.