Nivus NivuFlow 750, Инструкция по эксплуатации

Страница: 80 / 162

Instruction Manual
NivuFlow Mobile 750
page 80 NFM 750 - rev. 03 / 27.05.2020
•
Number of sensors used

only one: solid green area

two: colour combination green/red
Fig. 36-10 Indication of programmable ranges
You can assign one level sensor to each programming section (see Fig. 36-8).
The transmitter will automatically assign the sensors to the appropriate programming sec-
tions.
The assignment depends on the channel shape set.
•
NIVUS air-ultrasonic: Range bottom
•
Integrated pressure: Range top
•
etc.
This assignment can be configured individually. During this procedure only the previously se-
lected sensors are indicated (see Fig. 36-8).
It is possible to use even one level sensor for 2 or 3 programming sections.
In such a case the other activated level measurement values are merely saved in the internal
memory, however will not be used for calculation purposes.
Fig. 36-11 Level sensor assignment to programming section