Nivus NivuFlow 750, Инструкция по эксплуатации

Страница: 107 / 162

Parameter Setting
NFM 750 - rev. 03 / 27.05.2020 page 107
38.5.1 Service Level
The service levels are split into different, accordingly password-protected access levels.
The possible settings as well as the information available here require comprehensive expert
knowledge and are not needed for standard applications. This is why the service level is re-
served for NIVUS service personnel exclusively.
38.5.2 Restart
A transmitter restart interrupts the current measuring process.
The system will boot using the parameters previously set (saved). After the boot process the
system behaves as if being switched on (analog to a PC).
This menu point saves you from shutting down and restarting the system. All saved parame-
ters, counters and data will be preserved.
38.5.3 Powerdown
The >Powerdown< function switches the transmitter to energy saving mode. The instrument
will not resume measuring before it has been “woken up”.
38.5.4 Parameter Reset
A parameter reset will reset all parameters to factory default settings. Counter readings, mod-
ified passwords and saved measurement data are preserved.
The parameters will not be actually reset before you exit the service menu (back to main
menu) and confirm the storage process. At this point you can still abort the reset.
38.5.5 Update NivuFlow
Upload of a NivuFlow Mobile firmware saved on USB.
38.5.6 Update Bootloader
Upload of a bootloader software saved on USB.
38.6 Storage Mode
The >Storage Mode< menu determines the >Operating Mode< and the >Storage Cycle<.
Fig. 38-7 Storage Mode – Operating Mode