Nivus NivuFlow 750, Инструкция по эксплуатации

Страница: 90 / 162

Instruction Manual
NivuFlow Mobile 750
page 90 NFM 750 - rev. 03 / 27.05.2020
Fig. 36-23 Inputs/Outputs Menu
36.4.1 Analog Inputs
The transmitter is equipped with three analog inputs. The inputs are indicated in the top right
display corner from where they can be selected individually. The selected analog input is
highlighted and the clear name is indicated in the headline.
Default setting : Input not active
Alternatively, the transmitter can be used as an extra data logger for measurement values
from external systems or for supply of analog sensors. This, however, does not influence the
instrument’s capabilities as flow meter.
Analog input 1 is not always available as data logger
If, when selecting the h-sensors in chap. “36.2 Setting Parameters in Menu h-Sensors”, a
2-wire level sensor or an i-Series sensor has been selected, analog input 1 is not available
for use as external data logger.
Fig. 36-24 Analog input as external reading
The values below must be chosen/entered in >External Reading< .

Selection/Input Options:
Input Range: >0-20 mA< or >4-20 mA<
Unit: manual input