Nivus NivuFlow 750, Инструкция по эксплуатации

Страница: 45 / 162

Putting into Operation
NFM 750 - rev. 03 / 27.05.2020 page 45

See also chap. “33 General Programming”.
The LED is lit in white while the system is booting e.g. after plugging in the rechargeable bat-
tery or after a firmware update.

See also chap. “38.5.5 Update NivuFlow”.
31 Setting Up Connection
31.1 General
The NivuFlow Mobile is operated completely by using a standard smartphone/tablet or via
notebook/PC. Use the preferred display and operation module according to the respective
manufacturer specifications.
The following sections describe the connection setup procedures for Android, iOS and Win-
dows.
31.2 Android Operating System

Preparing the NivuFlow Mobile:
1. Ensure power supply: a minimum of one completely charged rechargeable bat-
tery pack either plugged into the instrument or alternatively connected via the
multifunction socket (see chapter “23.1.3 Operation/Charging via an Alternative
Power Supply”).
The following step “Wake-Up” can be skipped as soon as the battery pack is in-
serted now or when voltage is fed and the connection is set up within the follow-
ing five minutes.
2. “Waking up” NivuFlow Mobile: hold the accompanying magnet (solenoid, Fig.
31-1 no. 2) to the reed contact (Fig. 31-1 no. 1; on front side of NFM) until the
LED is lit.
Fig. 31-1 Waking up the NivuFlow Mobile

Steps on the display and operation module (smartphone, tablet, notebook, PC etc.):
1. Start the display and operation module.
2. Use the “Settings” symbol (Fig. 31-2 no. 1) to open the according menu.
Fig. 31-2 Settings symbol