Nivus NivuFlow 750, Инструкция по эксплуатации

Страница: 115 / 162

Parameter Setting
NFM 750 - rev. 03 / 27.05.2020 page 115
2. Uncheck >Default Digits<.
3. Specify the new number of digits.
Here you can enter any desired number, however more than a maximum of five
digits will not be accepted.
4. Go “Back” several times to save the parameters.
Setting the number of digits
When setting the number of digits observe the measurement accuracy of the sensors and
the measurement units set.
Example: the maximum resolution of the temperature sensor is 0.1 K.
41 Parameter Menu Battery (12V)
Use this menu to define the (rechargeable) battery type used as well as the according num-
ber of batteries.
Correct Indication of Battery Capacity
The capacity indication in the >System</>Information< menu is reliable only as long as fully
charged batteries are used and the battery type used as well as the according number of
batteries are specified here.
Select from:
•
1x NFM0 ZAPB 1215 (E)
One NIVUS rechargeable battery installed. The battery specifications are known and
available from the software.
Setting the number of the NIVUS batteries used enables the correct indication of the
battery performance in the >System</>Information< menu.
•
2x NFM0 ZAPB 1215 (E)
Two NIVUS rechargeable batteries installed.
•
BATTERIE_MODE_USER
The capacity [Ah] must be specified to correctly indicate the (rechargeable) battery per-
formance in the >System</>Information< menu.
Fig. 41-1 Menu Battery (12V)