Nivus NivuFlow 750, Инструкция по эксплуатации

Страница: 113 / 162

Parameter Setting
NFM 750 - rev. 03 / 27.05.2020 page 113

>Data< : Specify the data depth to transmit (Standard, Extended and Expert)
(see chapter “37.3 Data Memory”).

>Time< : Specify the time of regular transmissions; the time specified serves as
start time for the cyclic transmissions.

>Cycle time< : Set the transmission cycle in hours (1, 2, 3, 4, 6, 8, 12 or 24h).

>Test settings< : Use this menu to verify the settings, the results can be viewed
in >Diag Output<.

>Start Data Transmission< : Data (error information, archived data and current
values) is transmitted, the result is issued on >Diag Output<.
Fig. 39-6 FTP / E-Mail
•
>E-Mail<
Transmission to e-mail address.
The access data >SMTP server<, >User name< and >Password< are available from
your e-mail provider.

Check the according box for transmission to an e-mail address.

>Email-address< :
- >From<: E-mail sender address (must be accepted by SMTP server)
- >To<: E-mail destination address

>SMTP-Server< : Specify e-mail server name (e.g. mail.gmx.net). Provider must
support SMTP (Simple Mail Transfer Protocol).

>Port< : Enter the port of the SMTP outgoing mail server.

SSL encryption can be selected optionally.

>Username< : E-mailbox user name.

>Password< : Enter the password of the e-mailbox.

>Device to Web< : Activate in case of transmission to D2W; a format compatible
to Device to Web will be used.

>File format< : Available formats are csv and txt.

>Data< : Specify the data depth to transmit (Standard, Extended and Expert)
(see chapter “37.3 Data Memory”).

>Time< : Specify the time of regular transmissions; the time specified serves as
start time for the cyclic transmissions.

>Cycle time< : Set the transmission cycle in hours (1, 2, 3, 4, 6, 8, 12 or 24h).