1
Ethernet Over Coaxial Master/Slave Transceiver
MODEL: EA-EOC101K
◆
Description:
EA-EOC101 is designed to extend IP Ethernet transmission and use coaxial cable to IP
camera. EA-EOC101 transmission distance up to 2000m (6500ft), these transceivers are extremely
simple to use. Status LEDs indicate power and link connectivity/activity for RJ45 ports.
◆
Feature:
No PC required, plug & play and reducing the cables cost
Transmit IP camera or other 10/100 Base-T full duplex IP devices over coaxial cable
Up to 2000 meter transmission distance by RG6 cable
Built-in 6KV surge protection at BNC and 4KV at RJ45 ports
Multi EoC transceiver/IP cameras to one transceiver at NVR side transmission
◆
SPECIFICATIONS
:
MODEL
EA-EOC101
Extender Interface
Connector Type
1x BNC
Cable Type
75-ohm RG59, RG6, or RG11 video-grade coaxial cable
Max. Transmission Distance
2000m (6500ft.) for the RG6 coaxial cable
Ethernet Interface
Connector Type
1x RJ-45 with LEDs on Connector
Cable Type
Straight through or cross-over Cat5 Cable, Auto MDI/MDIX
Rate
IEEE 802.3x, Auto-Detection for 10/100Base-T and full/half
duplex
Control & Indicators
Color LED
Coaxial Data Signal Strength
Green
：
GOOD (Link speed > 60 Mbps)
Amber
：
MEDIUM (Link speed 20~60Mbps)
Red
：
BAD (Link speed < 20Mbps)
OFF
：
NO LINK
Yellow LED (On RJ45)
Power On
Green LED (On RJ45)
Link/Act.
Push Button
Reset / Pairing
(1)
(Join or Leave Network Group
(2)
)
Push Duration
LED
Status
Description
1 – 3 sec
Red Blink
Join/Host Network
Group
(3)
5 – 8 sec
Amber Blink
Once -> OFF
Leave Network Group
(4)
12 - 30 sec
OFF -> Amber
Blink Once
Reset to Default Network
Group
Power
Input Operating Voltage
DC 12V / 500mA
Power Consumption
1.5W
