Nivis Versa Router 1100 Titan - User Guide
v1.2
Page 107 of 111
6.1.4.4
Cleaning up the remote access to Edge Router from Windows PC
In order to clean up the settings after the connectivity test was done, the following steps are necessary:
1.
Disconnect from VR1000:
a.
On
Windows PC
(on administrator console), close 6in4 tunnel:
i.
netsh interface ipv6 delete address remote_user_tunn <
client_VPN_IPv6
>/128
ii.
netsh interface ipv6 delete route ::/0 remote_user_tunn
iii.
netsh interface ipv6 delete remote_user_tunn
b.
On
VR1000,
remove route to Windows PC:
i.
sudo ip route del <
client_VPN_IPv6
>/128 via ::<
client_VPN_IPv4
>
Example
using the variables chosen above:
e.
On
Windows PC
(on administrator console), close 6in4 tunnel:
ii.
netsh interface ipv6 delete address remote_user_tunn FD00::0AB9:000E/128
iii.
netsh interface ipv6 delete route ::/0 remote_user_tunn
iv.
netsh interface ipv6 delete remote_user_tunn
f.
On
VR1000,
remove route to Windows PC:
v.
sudo ip route del FD00::0AB9:000E/128 via ::10.185.0.14
2.
Remove VPN certificates and key for remote user from path c:\Program Files\OpenVPN\config on
Windows PC.
