Nivis Versa Router 1100 Titan - User Guide
v1.2
Page 48 of 111
3.9.1.2.5
Configuring the Edge Router Identifiers
Click on
Setup Identifiers
in the
Configuration
section.
The default setup identifiers need to be changed
only
if you have several collocated networks/Quarks or Titans.
In this case, each collocated Edge Router must have its own unique set of identifiers.
For ease of configuration, use the “Based on FAR ID” checkbox where available.
WARNING
Do not change the variables FAR ID and FAR ID on RF under any circumstance.